Speed up your Computer's processor
Programs continue to require more power which creates the need for your computer to be upgraded. The Gateway LX6810 desktop comes loaded with Microsoft Windows Vista Home Premium and up to a one terabyte hard drive. The specifications are very customizable and it can accept up to 8 GB's of RAM. It can also be ordered with an Intel Core 2 Quad processor, an Intel Core 2 Duo processor or an Intel Pentium Dual-Core processor. The CPU can be upgraded after the purchase to go with an even more powerful processor.
Instructions
1. Verify the type of CPU needed for this system. The Gateway LX6810 can accept an Intel Core 2 Quad processor, an Intel Core 2 Duo processor or an Intel Pentium Dual-Core processor that can be purchased from multiple retailers.
2. Create a back up of your system and valuable data. Power off the computer and if there is a master power switch on the tower, turn that off as well. Disconnect all devices and open the casing of the Gateway LX6810. Unscrew the screws that hold the casing in place and remove it from the unit.
3. The old CPU, heat sink and cooling fan must be removed, so clear any drive cables or components that are in the way to gain access to the processor. Take a note of anything that was disconnected so that it can be put back in place. In some Gateway systems the hard drive cables may need to be disconnected.
4. Disconnect the cooling unit from the power source or heat sink and unclip any heat sink supports. There is a small lever on the processor socket that needs to be pushed away to the side of the CPU and then lifted up. The processor will be pushed from the socket and can be removed.
5. Put the new processor onto the empty socket slot on the motherboard. Align the pin on the processor with the one on the motherboard, then slowly lower the CPU into the socket and make sure all pins are lined up to avoid damage. Press down slowly to make sure the processor is all the way in. Connect the old heat sink if a new one is not connected to the new CPU.
6. Reconnect any cables and components that were in place and power on the system. Log back into Windows before replacing the case to make sure you everything works correctly. Once everything is verified, shut off the computer and replace the case.
Tags: heat sink, Intel Core, processor Intel, make sure, cables components, cables components that